Speakers-Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black)
Customer Rating : 
List Price : $ 239.95
Price : $ 97.00
You Save : $ 124.64 (52% OFF)
Availibility :Usually ships in 24 hours
Speakers : Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) Features
- Single 10-inch subwoofer in black with built-in high-current amplifier for big bass
- Equipped with one 10-inch polymer-composite dynamic-balance cone driver
- Laser-based Klippel measurement technology for improved linearity and deep, precise sound
- Non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing
- Measures 14 by 14.38 by 16.12 inches (WxHxD)
Speakers : Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) Description
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. Read More …
Save on Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) online shopping from a greatest selection of Speakers.
Lowest Price Guarantee and FREE with Super Saver Shipping.
Speakers : Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) Reviews
|
912 of 929 people found the following review helpful:
 Polk PSW-10: Great, with some reservations, By
Ref Stanton “Refefer” (Northern Virginia) – See all my reviews
This review is from: Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) (Electronics)
I purchased this subwoofer about 2 months ago and since then have given it an extensive listening test. Following is a list of things I would do to improve sound quality as well as some reservations I have toward it. Before I start off, I would like to clarify one thing about the PSW-10 that might unjustly turn off potential buyers from it: it runs at 50 watts RMS. In the world of music and sound systems, one of the biggest misconceptions out there is that wattage directly correlates with how loud a speaker is. THIS IS NOT NECCESARILY TRUE! The efficiency of the driver determines how loud it gets at a certain wattage, not only the amount of power you’re pumping into it! This is why you can buy, for example, computer speakers that boast 400watts of power and have them easily massacred in terms of volume by speaker set ups with half the power (for further examples, compare computer speaker systems to shelf systems to a true sound system. You will find the volume, at…
117 of 123 people found the following review helpful:
Excellent sound, By
Amazon Verified Purchase
This review is from: Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) (Electronics)
I’m using this with an Onkyo TR-606 alongside a Toshiba 62″ DLP HDTV and a full set of Polk speakers, and the sound quality is remarkable. The only caveat is that the subwoofer input has two connectors, but you really only need to connect one of them. The manual is far from clear about this, and plenty of people will probably spend extra on a Y cable, or worse yet, put in an adapter which will add both cost and loss of fidelity. But just connecting to the left input works fine. Subwoofers are mono anyway, and the double inputs are primarily there to make certain wiring configurations easier, not to add more sound fidelity.
151 of 162 people found the following review helpful:
Polk Audio PSW10 Powered Subwoofer, By
This review is from: Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) (Electronics)
While I was looking for sub-woofer I was comparing PSW10 and PSW404. PSW404 sounds better but for the price 0 vs. 0 at J&R I opted for PSW10. The sale representative dropped the price for me even though they still selling PSW10 for 0 here. Those of you who worry about no LFE input, that shouldn’t be a problem. All you have to do is connect the sub-woofer output of the receiver to either the right or left input on the sub-woofer. And then set the variable low pass filter on the sub-woofer to the highest setting. This will set the internal low pass filter above the low pass filter frequency given by your receiver and create an LFE input. Or you may use a RCA cable to provide a connection to both inputs on the sub-woofer from the LR pre-out from the receiver. Then adjust the cross over frequency from the woofer as desired. It sounds a little louder and better for me. I bought Monster sub-woofer cable and it sounds no better than RCA cable. Try not to waste your money on this. It… |
Categorised as: Speakers